Cosmic Conservative

Rational Conservatism from the heart of America

True Life Stories: The dorm Laser

By CosmicConservative
When I started college at La Tech university in the autumn of 1977, just a month or so following the unexpected death of Elvis Presley, I picked "Biomedical Engineering" as my major. That lasted only as long as our first class video of a knee replacement operation, whereupon I immediately switched my major to "Physics" and am still glad I did. I am a physics snob, I freely admit it. Physics is the ultimate science. Pretty much every other branch of science can trace its roots to physics, and virtually every scientific theory or law was put forth from a physics standpoint, with the bulk of them having been proposed originally by physicists. One of the reasons physics was such a good curriculum is that physics labs were jam-packed with wonderful toys, but there were very few actual physics students who used them. Consequently the few physics students in our school had virtual unfettered access to a wide range of scientific gadgetry. Like lasers. My second college roommate was also a physics student, or else was in one of the other hard sciences that had a bunch of physics requirements. His name was Victor. He was pretty much the prototypical science nerd, including the white shirts with plastic pocket protectors, belt-holstered slide rule and plastic dark-rimmed glasses. He was the first person I ever met who owned their own computer, in this case it was either a kit computer or else it was an Apple I. I don't recall, I only recall that programming it required a mind-numbing process of "peeking" and "poking" page after page of hexidecimal values into the computer's memory. We programmed a lunar landing simulator on that computer. As I recall it took us weeks before we finally got it right. Our room frequently had some bit of equipment from the physics lab. Typical items you might find in our dorm room would have been triple beam balance scales, prisms, diffraction gratings, microscopes, circuit breadboards, high-precision calipers, gauges, vernier devices, multi-meters (volt, ohm, current), even an oscilloscope on occasion.. One of our favorite pastimes was to use the oscilloscope and multi-meter to investigate random integrated circuits that some previous physics lab instructor had inexplicably collected and stored in an anti-magnetic bag. Some of them we could find specs for, but this was years before the internet, so many of them were pure mystery and we'd try to figure out what they did. Back then integrated circuits didn't do a whole lot, a typical IC might do nothing but amplify a signal, or do electronically controlled AND, NAND, OR and NOR gates. Many were just electronically controlled switches. Our crowning achievement was when we figured out that one mysterious chip was basically a periodic signal generator. We even managed to connect it up to a paleolithic LED display circuit and created an actual clock. Yeah, fun times.... But without a doubt, the crowning achievement of our equipment appropriation was the laser. It wasn't a high power laser, it was a very low power laser that would be comparable to the laser pointers you can get today in the checkout lane at Walmart, but back then lasers weren't something that every kid had on their keychain. As it happens, at right about that same time, a traveling troupe of college entertainers gave a "concert" for the school. Their concert essentially boiled down to playing a bunch of music while projecting their visual interpretation of the music on a screen. They were particularly fond of Pink Floyd. At some point they claimed they had integrated a laser into the audio circuitry and that the music they were playing would stimulate the laser to generate random effects on the screen. So then they played some classical music and the laser beam danced a drunken pattern across the screen creating a jumbled mess. Then they played some modern Rock and Roll, and lo and behold! The random patterns suddenly coalesced into highly symmetrical complex patterns. The crowd of young college students loved it. Of course Victor and I smelled a rat, and we thought we recognized some of the patterns as being a sort of signal kaleidoscope effect that you could generate by reflecting a signal across multiple axes. In other words, it looked like all they were doing was sticking a series of half-silvered mirrors into the laser beam which created the wonderful symmetry. But that wasn't what intrigued us. What intrigued us was the notion of using a laser to interpret an audio signal. In the end we decided that one way to cause music to create a visual signal was to bounce a laser off of a speaker. So we bought a couple el cheapo speakers at Radio Shack, or else liberated them from some no longer functioning radio or tape player. As it happened, at that time my summer job was as an apprentice glazer, and one thing glazers know how to do is cut glass. So I cut a long thin strip of glass from a mirror and then cut tiny little mirror rectangles from the mirror, each one roughly half the size of a grain of rice. Then we glued one of the tiny squares to the speaker's diaphragm. Then we plugged the speaker into a casette deck tape player, aligned the laser beam on the mirror so that it reflected onto one of the blank walls of the dorm room, and turned it on. To call the results disappointing would be rather an understatement. Basically we got the laser to move, but the amplitude of the resulting laser beam perturbation was so tiny that even with it being reflected across the room, it was still almost unnoticeable. Now, if it had been an electronic signal, we could have just used one of our ICs to amplify the signal, but we were dealing with actual noise in a crowded dorm room in a period of American history when people actually still cared if their music was disruptive to their neighbors. So increasing the volume wasn't an option. So we went to the library and did some research on speakers. We discovered to our surprise that the actual physical movement of speaker diaphragms was quite small except on one axis. Plus the power of the resulting sound was due to the movement of the entire speaker diaphragm, not the tiny area we had glued the mirror to. In other words, the mirror was only reacting to a tiny fraction of the energy the speaker was dishing out. So we went back to the drawing board and tried to figure out a way to exploit the full power of the speaker and increase the amplitude of the signal. According to the books on speakers, the amplitude of the speaker diaphragm's movement was inversely proportional to its tensile strength. In other words, the less "stretchy" the material was, the less the material would move. This is considered desirable in speakers because sound (or signal) distortion was directly proportional to speaker diaphragm stretch. So to get the sort of signal we wanted would require a much more flexible diaphragm material and the resulting sound would be somewhat distorted. But we didn't know how to build speakers from scratch. Oh, we understood the THEORY of speaker design, that was physics, but the actual IMPLEMENTATION of a speaker was beyond our skills, that was engineering. Nevertheless we sacrificed a noble speaker volunteer and attempted to replace the stiff paper diaphragm with a much more flexible rubber diaphragm, made from a cut up balloon. To call the results a "dismal failure" would be too kind. So there we were, defeated by the need to construct a speaker, or at least modify a speaker. But as I sat there with the bit of balloon rubber in my hand, and a disassembled speaker on the desk, I had a brainstorm... We didn't NEED for the mirror's diaphragm to be driven by electronic signals. We just needed it to react to the music. And we didn't need to amplify the signal, we just needed to use a material which deformed much more readily than the hard speaker diaphragms did. So I simply stretched the balloon rubber over the front of one of our remaining speakers and turned the sound on. Remarkably, you could actually SEE the balloon rubber deform. So I glued another mirror shard to the balloon rubber, aligned the laser beam, turned off the lights and SHAZAM! It worked! In fact it was giving us virtually the same sort of patterns the traveling show claimed to get out of classical or big band music. No matter what we played the end result was a gyrating, pulsating mass of laser squiggles on the wall. The louder the music, the larger the pulsating mass was. By putting a beam splitter just in front of the speaker we were able to create a one-axis symmetry, but that was all we could do, and the result split the laser so that you got an identical display on opposite walls. At just about that moment, one of our dorm neighbors came into the room. Now remember, our room was dark and we were playing some raucus rock and roll music, probably AC/DC or something like that, and this light was dancing all over two walls. "Far out! A DISCO!" So for a short while, until the novelty wore off, we were in the DJ business. During that period we discovered the wonders of silver and gold mylar and bought some mylar helium balloons. We would tape light objects to the helium balloons until they were neutrally buoyant and then turn off all the lights, crank up some "Peaceful Easy Feeling" and lay in our beds watching the light show and every now and then the mylar balloon would drift across the laser beam's path and would be reflected all over the room until the balloon sailed back out. Physics nerds.... what can I say?

Comments (1)

Andy
Sigh... Cosmic, you lost me at "When I started college..." Most everything after that read like Latin, except for the deal about Elvis dying, and rubber, and grains of rice. Physics nerds... Nyuk! :)