Cosmic Conservative

Rational Conservatism from the heart of America

Deck Update #6

By CosmicConservative
Yes, it is becoming a summer-devouring thing. You know, it's hard to make stairs. Well, maybe it's best to say "it's hard to make stairs right." Not that I have, mind you, but I'm trying. See, the original stairs I had, the ones I tore completely apart and threw away last week, had two major problems. First the treads were too long without middle support. Normally I'd have said the "steps" were too long, but on the "how to make stairs" websites I've found, I think they call them treads. The treads on my original stairs were basically three feet in width. That's a long span to carry. Most stairs you see in decks today are roughly three feet wide, but they have three supports, one on each side, and one in the middle. The other problem with the original stairs was that they were made with small 2x4s nailed to the side of the risers, with the treads nailed into the 2x4s. Over time water worked its way between the 2x4s and the riser board and that's where virtually all of the rot on the boards came from. So I am trying to avoid both of those problems. So I am building stairs with three supports and with the stair pattern cut into the support. The treads will mount directly on top of the risers. This should give the stairs much more middle strength and should also reduce the water rot problem. But there's a catch. I wasn't able to use the precut stair patterns they sell at Home Depot. Because the concrete base for the stairs is placed where it is, I have to either lay more concrete to get to a 45 degree angle, or else I have to custom cut 2x12s into the pattern I need. So that's what I decided to do. And that's when I learned that stairs ain't easy. But as of today I have the first riser cut to fit, and with the stair pattern cut into it. It came out pretty good, actually. Now I just have to cut two more exactly like it, and I'm all set! Well, I still have to drill bolt holes in the concrete to bolt down the stair base so it won't slide, but I am hoping that's not a huge deal. But because I decided to take today off and spend time with the family, I have lost yet another day in the never-ending battle to finish my deck. Three weeks now and counting. And I still have not laid the first Trex board....

Comments (0)

No comments on this post.