Sculpting miniatures
By CosmicConservativeSo, I've written a couple of posts about my new obsession for creating miniature fantasy figures for play in role-playing games. Forgive me for boring those of you who find this uninteresting. I'll get back to my naive comments about world politics soon enough. ;)
So I originally just bought some bakable polymer clay and started trying to make some usable miniatures. I posted some pictures of the process I came up with for the 75 or so miniatures I've made so far. Basically I just make a simple wire skeleton and then put the bakable polymer clay over it and shape it.
At first I was just making basic shapes, body, arms, legs and head, with some effort to make a shield or sword or spear just to make them more interesting.
But like most things, I was not satisfied with the results of that when compared to commercially available miniatures (which admittedly are much more costly). So as I always seem to do, I am getting sucked down into the world of sculpting miniatures and have been googling like crazy trying to find tips, techniques, tools and materials help. I even joined a sculptures message board forum. Sheesh, as if I need something else to suck up my time.
But I know myself well enough to know that I have to pursue this obsession until it abates and is replaced by a new one, whatever that new one will be.
As you can probably tell from the above comment, this isn't the first time I've tackled some craft. I do this about once every two years or so. My last obsession was deck building, as the dozens of posts on that subject here on the blog probably proved. Prior to that it was guitar playing (which is still an obsession, and I still suck at it). Prior to that it was telescope building, and I built several telescopes, both refractor and reflector models. Prior to that it was origami (which is still an obsession, and I still suck at it). etc... etc.. all the way back to tying flies and making jigs for fishing purposes 20 years ago.
In all of those cases I have seen one consistent truth to each of the crafts I have tackled. And that truth can be summarized in the following points, which I call the "Rules of Crafting".
Rule #1: Crafting is not art. It can include art, but to be successful in a craft does not require true artisanship. The difference between craft and art is all about creativity and execution. Making a bookshelf is craft. Making a unique and beautiful bookshelf that makes people stop and enjoy its beauty is art. I am not an artist, my results are universally solid, functional, durable, and plain. I look at this as an advantage because I set my expectations accordingly. I'm not looking to become a miniatures artist, I am looking to become a miniatures craftsman. As Clint Eastwood so accurately put it in Dirty Harry, Magnum Force: "A man's got to know his limitations." I am comfortable with mine. As I tell people who snicker at my telescopes, "They are made to look through, not look at."
Rule #2: You have to know what your end result is going to be. Artists can "wing it." Craftsmen have to have a plan. You have to know your goal. For miniatures my goal is as follows: Create a set of miniature figures that allow me to run an exciting and realistic campaign for my role-playing group. I figure it will take about 200 miniatures to have everything I need for the basic campaign, and then I can make unique as-needed miniatures using the skills I developed making the 200 I already know I need.
Rule #3: You have to use the right materials. This is much more critical than it seems. If you use the wrong materials, you will never achieve the right results. For my miniatures I chose to use polymer clay. I chose that because it was cheap, available, and forgiving. The resulting sculptures, if baked and braced properly, are strong, durable and have an attractive porcelain appearance when baked. Of course now I am wondering if that was the right choice because most of the "pros" use "green stuff" which is an epoxy putty and the techniques for using the epoxy putty are significantly different than the polymer clay. The putty is very sticky and the process for creating a sculpture is additive, you basically build up your figure one little bit at a time. Polymer clay is more subtractive/molding, and it isn't sticky. Epoxy putty "cures" rapidly, while polymer clay has to be baked to cure. This means you have a short time to work on a sculpture when using the epoxy, and have a much more leisurely time to work with the polymer clay. That's why I chose the clay, and I think I'll keep using it until I achieve my initial goal (the 200 or so miniatures) but I will probably get some green stuff at some point and try it out too.
Rule #4: You have to have the right tools. Usually that means there is a basic set of tools that you must have, and then a more personal set of tools that each craftsman uses that are the real tools that get the job done. Usually I end up only having the basic set of tools because I'm too cheap to buy the ones that the really good people use. That's where I am now with the miniature sculpting. I have the basic tools, but there are a whole slew of "recommended tools" that I can't justify since one of the major goals of this whole endeavor was to populate my campaign more cheaply than buying commercial miniatures. If I bought all the recommended tools, I'd quickly spend more money than just buying the miniatures themselves. This is a common conundrum for me. For example, when I was learning to tie flies everyone told me to get a whip finisher tool, which cost about $10. Instead I just forced myself to learn how to whip finish a fly by hand. But some things aren't that simple. Working on my deck it was clear that a table saw would have been a great tool to use, but I did not have one so some of my cuts are a little off. As I said, I tend to make functional but plain things, and this is one reason why.
Rule #5: There are tricks that the pros know that they sometimes guard jealously from amateurs. Thank goodness for google. On my deck this mostly came into play in making the stairs. If I had not researched making stairs on the web, I almost certainly would have made some of the most common errors amateur deck builders make, the most common of which is the incorrect placement of treads. For the miniatures I am just now in the realm of searching and finding those tips and tricks. Last night I stumbled across a .pdf file of a presentation a miniatures sculptor did in Europe and who uploaded it to the Internet out of the goodness of his heart. That single .pdf file has greatly changed my approach to making miniatures. I did a couple of prototype heads last night using the technique and was amazed at how much easier and better they were.
I wonder sometimes if I have some mild form of obsessive-compulsive disorder...
I probably need to start a completely separate blog for these compulsions...
Comments (0)
No comments on this post.