Cosmic Conservative

Rational Conservatism from the heart of America

Deck Update #2

By CosmicConservative
OK, another day of nothing but deck. Sheesh, what a job. So, upon examining the "splicing" the previous deck builder had done on the east side, I discovered something astonishing. The northeast corner of my deck had not been attached to the east side of the deck at all. They had instead cantilevered the deck out fully six feet into thin air, where it was hanging on by one board that was rotted about 1/4 of the way down. I'm amazed upon realizing what had been done that the deck had not collapsed, or at least sagged dangerously. The thing that is so amazing about this is that they cantilevered the deck out six feet where it hung four inches from a perfectly good 4x4 redwood post. So I had to do pretty major surgery on that portion of the deck, and it took me pretty much all day, but now I've got the north side of the deck, including the northeast corner, framed and hung with fresh new joists. (I keep wanting to call them "jousts" for some reason...) All that is left to do in that section is to put in the Trex flooring and the spines (if that's what they are called). Now I have the biggest section left, the east section which is the exit from our kitchen door. Up until now I've been manhandling 6 foot sections of pressed and treated 2x8s. The kitchen section requires setting 12 foot sections of pressed and treated 2x10s. So they are more than twice as heavy. Which means it is not likely that I'll be able to handle them by myself up on a six foot ladder. My plan is to clear out all the old joists, reframe the perimeter with new girders, put up all the joist hangers, then put them all up one after another... Then I have to seal and paint everything. Then I can start putting the Trex flooring on, and finally I can reattach the spines and replace some of the railing boards. Oh, and then replace all the steps with new redwood steps. I couldn't use the Trex for the steps because the stairs are too wide. So I'll probably be replacing them in a few more years. By then maybe they'll have composite materials as strong as wood that can be used as stairsteps. Whew, I am sore and tired. But I figure I'm more than halfway done now.

Sports observations

By CosmicConservative
Well, Barry Bonds passed Babe Ruth today, on a pitch from a Colorado Rockies pitcher. But HEY, the Rockies won for the first time in a week, so it's not all bad. Some race called the "Indianapolis 500" seems to have happened while I was working on my deck. Seems like I used to watch that and care about it. When did I lose track of the Indy 500? Albert Pujols has hit 24 home runs, and it's not even Memorial Day yet? Yikes! What the heck is going on with this guy? Tiger's still not playing though. Just doesn't seem like Memorial Day weekend without watching Jack and Tiger....

Deck fixing blues...

By CosmicConservative
Oh my, I did not know what I was getting into when I decided to tear up a few boards and replace them after breaking a board in my deck, when was that? Yesterday? Sheesh... So, I tore up a few boards, realized I had to tear up a few more, pretty soon it was "well I may as well replace all of them." Then I pulled them ALL up, and discovered some very unhappy news.... I have some bad joists. So, now I'm pulling joists up and replacing them. But then we decided we didn't want to have this maintenance nightmare again, so we decided to get new composite material deck boards. Well, that means we have to replace all the joists. So now my deck on the north and east side of the house is completely taken apart. I spent all day yesterday ripping off the boards. Today I had a bunch of decking materials delivered and I started rebuilding the deck. The new maintenance-free boards (Trex, for anyone who is counting) don't support the same amount of weight as the old redwood boards (but the don't rot out either...) so the hardware guy said "you have to set your joists sixteen inches apart." Oh, well, my joists are 24" apart. So do I move them? No, I decided to just add new ones between the old ones, so my new deck (which will look astonishingly like my old deck) will have joists that are 12" apart. I figured that today I'd get the new joists in and then tomorrow I'd put in the flooring and I'd be all done by the time my wife's folks fly in for my daughter's graduation. Big mistake. First I discovered that the deck "girder" along the north side of the house had been cleverly spliced by the previous owners for some unknown reason. Perhaps they added new deck space on after the house was built, whatever the reason, the girder was not solid. Secondly, the added on girder had been badly abused by whoever spliced it on. They had split the girder all along its length where they had used heavy-duty deck bolts to attach the fencing (I'm sure there is a fancier name for the stuff on the edge of your deck, "ballustrades" or something.... who knows). Anyway, they appear to have not drilled big enough holes and the whole dang board had split, so I had to replace it. So I spliced it too.... sigh... But this took me hours to complete, hours I had expected to spend hanging and replacing joists. So I didn't even get halfway done with my goal of putting all the joists in. Now it looks like we are not going to have a deck when our company visits. And then tonight, before I came in, I discovered that they had done the same thing on the east side of the house, so now I have to figure out what to do there. It looks like they added on that entire corner which goes around the north to the east side of the house, and they did it by splicing onto the existing deck girders. So tomorrow it looks like I may be engaged in more major construction..... Sigh... All because of a broken board. But obviously it needed it.

On deck maintenance

By CosmicConservative
Today I broke a board in my deck. Ouch. Upon examining the damage, I discovered that I have some serious deck maintenance issues. These are probably the result of my having allowed feet of snowfall to accumulate on the deck and leaving it there for weeks at a time during hte winter. Now I've got several boards that are in bad shape, and the one that is broken. Also last year I cut down a tree that was growing through the deck and managed to damage the railing where the falling tree didn't quite clear the deck, and now there is a hole where the tree used to be. So we are investigating major deck repair. The two fundamental options appear to be "go with traditional wood materials" or "use the new fancy composite materials." The benefit of the first is that it is about half the cost of the second. The benefit of the seccond is that for people like me who don't take care of things the way they should, the maintenance needs are greatly reduced. Either way the work effort is going to be significant. I have been told that decks are particularly vunurable to weather stress and damage at our altitude. The ony suitable composite material just happens to be the most expensive (called "Trex"). Unfortunately the material may last longer, but it has nowhere near the tensile strength of wood, and so I need to add joists between all of my existing joists to have it be safe to walk on. Which adds both time and money to the effort. I'm leaning to the composite just because of the maintenance issue, but boy is it more expensive....

Science answers the <b>BIG</b> question

By CosmicConservative
Which came first? The chicken or the egg? The answer reached by a team of a geneticist, a philosopher and a chicken farmer has settled the question once and for all. The egg. Any questions? Actually the logic is pretty compelling. Since species jumping mutations are theoretically not possible in an adult animal, whatever changes occured which created a chicken must have occurred in the zygote, which became embedded in the egg, where the embryo developed into a chicken. So the egg was laid, the embryo developed, and a chicken hatched. Voila! But this begs the question. Was the zygote before the egg? If so, and if DNA is all that defines an animal, wasn't the chicken zygote created before the egg was formed? If so, then wouldn't the chicken have come before the egg? This is perilously close to the abortion question of when an embryo becomes a person, isn't it?

Fusion news

By CosmicConservative
Fusion research is about to get a big boost. My favorite line?
However, environmental groups have criticised the project, saying there was no guarantee that the billions of euros would result in a commercially viable energy source.
Environmental groups are opposed based on a return on investment analysis? Right. Sure they are. Actually environmental groups are opposed on purely ideological grounds. It's science. It must be bad. So, who is involved?
The seven-party consortium, which includes the European Union, the US, Japan, China, Russia and others, agreed last year to build Iter in Cadarache, in the southern French region of Provence.
I'm glad the US is involved, although I am less than thrilled that they are building the facility in Southern France. You gotta give the French credit for that though, they certainly need the jobs. Of course I can't comment on a science news story without snarking about the reporting itself:
Fusion taps energy from reactions like those that power the Sun.
"Those" that power the sun? As far as I know, the sun is powered entirely by a single fusion reaction, the conversion of hydrogen into helium. Now some time in the far future there will be a shift as the hydrogen runs out and the sun shrinks, heats up and begins to fuse helium into heavier elements, but for now, and for the next few billion years, it's pretty much hydrogen to helium in the sun. Continuing this snark, it isn't likely that fusion reactions on earth will be converting hydrogen to helium. It is much easier to work with deuterium or tritium than with hydrogen. But perhaps I'm being too critical now....
One kilogram of fusion fuel would produce the same amount of energy as 10,000,000kg of fossil fuel.
Oh, really? Which fossil fuel? Coal? Kerosine? Gasoline? Natural Gas? This is such an ignorant statement that it simply dumbfounds me that it gets past any decent editor. First of all there is no "standard fossil fuel" energy measure to compare to, and the amount of energy produced by fusion is unknown at this time. Besides, measuring the amount of "fuel" consumed in fusion reactions may be a completely meaningless measure. It may be far more important to measure the amount of catalylsts, reagents or other materials "consumed" by the process of generating fusion energy. Nobody has any idea at this time if it will require billions of gallons of water to generate feasible fusion energy reactors. Or if it can only be accomplished through the use of specific catalysts that have to be created in a process that consumes tons of petroleum. Who knows? Such speculation is factually meaningless until we have something up and running somewhere. I am as optimistic as anyone about fusion power, and believe that it will one day solve the world's energy problems, but I am not about to go around saying fusion will generate 10,000,000 times the energy based on the same amount of fuel. That's just meaningless gibberish at this time. Oh well, I could go on, but I'm not feeling particularly snarky anymore. Besides, I have to get back to work, lunch is over. UPDATE: Well I couldn't resist snarking on this quote:
"Investment in energy efficiency and renewables is the only reliable way to guarantee energy security," said Silvia Hermann, from Friends of the Earth Europe. "Giving billions of euros to a single nuclear project that is so far from reality is ill judged and irresponsible."
This is so insanely blockheaded and wrongheaded that I find it difficult to believe a human being with functioning gray matter could make such a statement without laughing so hard she couldn't stand up. "Energy efficiency and renewables is the only reliable way to guarantee energy security." What insanity. What stupidity. Oh yeah, we're going to conserve enough energy to launch our galaxy-wide colonization program. Sure we are. All we need is a bit better insulation in every home in the world, and Alpha Centauri is right there for the taking. Idiot.

Bush's recent apologies

By CosmicConservative
I love political debate. It's so much like kindergarten recess. For years now I have heard liberals repeatedly say "If Bush would only admit he made a mistake, we'd stop beating him up! His problem is that he's too arrogant to admit a mistake." Of course I have always replied: "Right... as soon as he says "oops" you will be all over him like white on rice talking about how this shows how stupid he has been." So, sure enough, Bush apologizes for the "Dead or Alive" comment and some of his less sophisticated rhetoric, and the response from the left? I've not seen one "Oh, finally we see Bush is human. At least he's admitted it. Let's move on." Nope, what I hear is "SEE!!! WE TOLD YOU!!! STUPID NEOCONS!!!! HAHAHAHAHAA!!!" Just as I predicted. sigh.