Cosmic Conservative

Rational Conservatism from the heart of America

Living

More on the Condor Bounty Hunter

By CosmicConservative
So I had an early, early morning meeting this morning so had to go to bed early (I'm working on an international project now and the project lead is in London, so lots of early morning meetings....) So I didn't have time to really put my thoughts down about the new pellet gun. In case I need to remind you, this is the gun I bought: It is not cheap. The gun itself is over $500, and with all the other stuff you need, it ended up being pretty close to a grand. Yes, I know. I am insane. I do this sort of thing about once every five years or so... The Cosmic Wife says my biggest problem is that I have champagne tastes and a beer budget. She's right. When I get interested in something I find it very difficult to accept less than a top of the line item. That's why I own the most expensive 92mm apochromatic refractor telescope in the world... I tried this time. I really did. I decided that I would go with the "mid-range" option for pellet guns, which is the "break barrel" design and after tons of research and discussion with the "experts" I ended up buying what was supposed to be the best match of accuracy and power in the break barrel arena, but I just couldn't shoot the damn thing straight. Plus the shock wave from the recoil was tearing the gun apart. Literally. Parts were falling off and breaking. So I decided to go up one level to the PCP realm. Unfortunately that more than doubled the cost. Oh well. Forgetting all the irresponsible financial escapades involved, I'd rather just talk about the gun. I had asked Pyramyd Air to set the gun up for me, something they offered to do at no charge after all the grief I had with the Hatsan models. So it came to me pre-assembled and shipped in my previous gun case. It was also pre-sighted in, but at 10 meters (which is what their in-house shooting range is set for). But, because the air tank is a Department of Transportation certified high pressure gas container, it has to be shipped empty, so they had vented all the air out before shipping it to me. Meaning I had to spend 90 minutes or so pumping it up. Most of that 90 minutes was me resting between 50 pump sessions so that I didn't do anything stupid like throw my back out. Plus I wasn't in any great hurry and I had expected to have to fill the tank up one pump at a time. I did manage to get the tank filled up to about 2,600 psi well before sunset though, which was my real goal, so I was able to go outside and shoot it. I did set it on the lowest setting. This was for a couple of reasons. First, the only really negative comment about these guns that I saw on the boards was that it was supposed to be loud. "As loud as a .22 long rifle, if not louder!" was a pretty common comment on the boards. Shooting at lower power means less of an air shock wave, so less noise. Secondly, shooting at a lower power means you use less air, meaning you get more shots. That is especially attractive to someone who just spent 90 minutes pumping up an air tank. And finally, I am in a residential neighborhood, in spite of it being in a rural town with large, tree-infested yards. So I didn't really want any ricochet that might happen to have any more power than needed. So at the lowest power I took my first shot. I use a "bullet capturing device" when I target shoot in my back yard. It's basically a box made of thick steel which is designed to contain a .22 long rifle bullet. The back of the box is angled so that the bullets or pellets hit the back and ricochet down into a capture area where the lead is supposed to settle so you can recover it and remold it into new bullets or pellets. (Yeah, I'll probably eventually get to that point...) So I used a bit of construction paper with a little self-adhesive "bullseye" that is about the size of a small coin. The first shot was a bit off because the trigger was much, much lighter than I expected. So it went a bit right, but was way high, probably three inches high, which is pretty dang high for a 20 yard shot. Plus it made a really loud sound when the pellet hit the steel box. Much louder than the report of the pellet gun itself. So I dialed down the scope quite a bit and set up a small piece of 3/4" plywood in front of the box, figuring the plywood would either stop the pellet or reduce the speed so much that the "blaanggg!" of the pellet hitting the steel box would not be so loud. The second shot was just a bit more than an inch high, and made a satisfying "THWOCK!" sound when it hit the wood. That pellet completely penetrated the plywood, but remained embedded in the shattered back side where it came out. So I dialed down the scope a bit more and took another shot. In all it took me four shots to dial in the scope. I took one more shot to be sure that it was really dialed in, for a total of five shots into the plywood. By then the back of the plywood looked like it had been hit with a grenade or something. Some of the shots had cleanly penetrated the plywood, but a couple had just barely remained in the wood. Remember, this is on the LOWEST power setting. Now, I had shot at that same piece of plywood with my Hatsan before sending it back. Keep in mind that the Hatsan 125 is considered one of the, if not THE, most powerful .25 caliber break barrel gun on the market. The pellets from the Hatsan had never penetrated all the way through. They were embedded in the plywood but had barely even made a bulge on the back of the board. So the Condor, on its lowest setting, was already blowing the Hatsan away. And I was using lighter pellets with the Condor too, meaning they delivered less impact at the same muzzle velocity. The bottom line is that I am very, very pleased with this gun. Right now the only thing I am less than thrilled about is that I have to disassemble the stock and tank to refill the tank. They do sell a tank that has a refill valve that you can refill without undoing the tank. I'll probably end up getting one of those.... They cost about $100 or so... Sigh.... But the gun is sweet. :)

The Bounty Hunter

By CosmicConservative
New Air Force Condor "Bounty Hunter" model came in today. Took 90 minutes to pump the tank up to 2,500 psi. Took it outside and put it on its lowest power setting. Oh. My. God. Four shots to sight in. Hitting dime-sized bullseye at 20 yards. Trigger is sweet. Scope is great. Shooting through 3/4 inch plywood with .25 caliber pellets. Sounds like a bomb going off when it hits the wood. Splinters fly, it's just awesome! I think I'm gonna like this gun.

Andy Griffith has died

By CosmicConservative
Sad day. I will have more thoughts tonight. UPDATE: OK, so I didn't get this done last night. So sue me... Many conservatives are leading their Andy Griffith comments by bemoaning Andy's 2010 televised Obamacare appeal. I think that's a shame both because Andy Griffith has every right to hold and express opinions on politics, and because his politics have very little, if anything, to do with his cultural impact on this country and the world. I always believed that Andy Griffith was one of the least appreciated actors in Hollywood. He was routinely lauded for his amiability and his appeal to multiple generations of Americans. This is one of those cases where being a nice guy actually hurts a guy's professional reputation. My first memories of Andy Griffith are, like most people's, from "The Andy Griffith Show" where he played amiable, common-sensical Sheriff Andy Taylor. But before he landed that iconic role, he had key roles in a few major movies, most notably "No Time for Sergeants" and "A Face in the Crowd." He also starred on Broadway, losing the Tony Award to Jackie Gleason for the titular role in "Destry Rides Again." I've seen both "No Time for Sergeants" and "A Face in the Crowd" and in both movies Andy demonstrates powerful acting skills. One of his co-stars in "No Time for Sergeants", in a minor role as a psychologist I think, was a young Don Knotts, who at that time was a major stand-up comedian with regular appearances on national talk shows. They became good friends, and would remain good friends for life. When given the lead role in "The Andy Griffith Show" he immediately called Knotts and convinced him to take a role as his "cousin" and deputy. The role was originally conceived to be a small role because the shows writers had intended to showcase the comedic talents of Andy Griffith. But Knotts' portrayal of bumbling, megalomaniacal Barney Fife was so hilarious that Andy himself soon lobbied the writers to change the shows theme to allow Sheriff Andy to play straight man to Deputy Fife's over-the-top antics. This self-effacing tendency of Andy Griffith is a hallmark of his career. He truly seems to have been a humble man who was proud that Don Knotts' portrayal of Barney Fife was routinely nominated for and won Emmy Awards while Andy himself was never even nominated for an Emmy. In the middle of the show's run, when Don Knotts' fame was at its height, Knotts attempted to leave the show for good as his Hollywood movie career shot into the stratosphere. At one point Don Knotts was the highest paid actor in Hollywood. Andy convinced him to continue to do guest shots on the Andy Griffith show and the two remained good friends though Andy's own Hollywood movie career never really took off. Several years after the end of the Andy Griffith show, after a series of movies and other TV shows that kept him employed, but not on the A-List, Griffith again hit paydirt with the country lawyer show "Matlock." I never watched Matlock, so I can't really say whether it was good TV or not. But again Andy's contributions gained little beyond public acclimation and while others on the show were nominated for awards, Andy was not. The few acting awards that Andy did manage to acquire over the years were usually due to character acting roles in movies or TV miniseries. He finally received his only Emmy Award nomination for a TV movie I never even heard of. Yet throughout his career Andy was beloved by the public. He may not have received critical acclaim or awards in Hollywood, but throughout the country there are streets named after him, community events based on his TV shows, a Martin guitar was made in his honor, etc. And George W. Bush bestowed the "Medal of Freedom" on him in 2005. Andy will be missed. Asked once about his legacy, and what he would want people to remember about him, in his typical fashion he demurred, finally simply saying something like "I tried to entertain people. If people enjoy watching tapes and films I've made, that's enough for me." RIP Andy.

Yet another pellet gun post

By CosmicConservative
.... because posting about pellet guns is not remotely as depressing as posting about politics... So.... some thoughts on accuracy. I am probably crazy when it comes to accuracy. My expectations are probably totally out of whack with reality. Especially when you consider all the variables that go into shooting a pellet 30 yards or more downfield. How accurate is "good enough?" Well, for most purposes "good enough" accuracy is defined as "1 inch groups". That's because the "kill spot" on most small game animals is about the size of a 1" diameter circle. Even larger game sometimes have small kill spots too, and obviously more accurate is always better than less accurate. "Aim small, miss small" is a maxim in shooting that has been true since people first started launching sticks into the air with atlatls. Some people aren't happy with 1" groups though. Particularly at close distances like ten meters (which is an Olympic sport, btw... the US has a 10m pellet gun team competing in London this month). Serious shooters expect to have groups well below 1/4" at ten meters. Obviously that's not much room for error, considering the following: 1. Pellets are rarely uniform. Even the best commercially available pellets are produced through the use of multiple pellet molds, and as such, even if each batch was molded and de-molded perfectly, there would be differences in weight and size just due to the differences in the different molds. Add in the tendency for cast metal to have flashing, bubbles and other defects and it's amazing that there is any consistency at all. It is not uncommon for the weights of commercial grade pellets to vary by as much as 10%, and the same is true for size. 2. Air pressure is rarely consistent. This is actually a big problem. PCP guns tend to operate at 2,000 - 3,000 psi air pressure. Air reservoirs are not highly sophisticated devices. In fact they are generally nothing but a bottle with a valve on top. The valve is held closed by a spring. When you want to put air into the bottle, you push down on the valve to open the airway and then force air into the bottle until it's full and then you allow the valve to close. To get air out of the bottle you do the same thing. (Some bottles actually have an input and an output valve, but those are more expensive bottles). So the way this works is that you "tap" the valve to open it for a split second, which allows a burst of air to come out before the spring slams the valve shut again. The way most guns do this is with a "hammer" which slams against the valve. The hammer is cocked by compressing a spring and when you pull the trigger the spring is released, the hammer flies down a tube and smacks the valve, the air is released and flows into the breech where it then propels the pellet down the barrel. How much air is released, and how fast, is determined by the speed and weight of the hammer, the distance the valve has to travel, the air pressure inside the tank and the size of the airway in the valve. Each time you hit the tank the air pressure is reduced. Most guns get about 15 to 20 shots before the air pressure in the tank is reduced to the point that accuracy suffers and you have to "top it off" again. One reason I got the AirForce gun is that they use a massive air reservoir which allows for many more shots in the "sweet spot" before you have to pump more air into the tank. 3. All of the things that normal guns have to deal with come into play as well. How is the scope mounted? Is the barrel straight? (No barrel is actually straight, in fact determining the direction of barrel bend is part of the job of gun builders.) The trick is to have the barrel's bend be in line with the scope or barrel sights. Gun barrels are graded the same way fishing rods are, their natural "bend" is marked and the barrel is mounted on the gun with the natural bend set so that the projectile won't "drift" when fired. Other things that come into play are torque, vibration, flexture, etc... So... considering all of this, how the heck can you shoot accurately? Well, all of the things in #3 are well known and have solutions that have been in place for firearms for hundreds of years now. So that leaves items #1 and #2. For #1 serious shooters grade and separate their pellets by weight and size. Yes, they do. Seriously. They use digital scales to weigh each pellet and they use different techniques to separate according to size. Then they put the graded pellets in tins with the weight and size marked on them. Plus they clean the pellets, removing all flash, discarding all malformed or incomplete pellets and they even wash them and in some cases lubricate them. (Some shooters believe lubricated pellets gain up to 10% more velocity than un-lubricated pellets). For #2 the only real solution is what is called a "regulator." Yes, that's the same thing that scuba tanks use, and it serves the same purpose. A regulator changes the outgoing pressure of a tank from whatever the internal pressure is to a consistent pressure. Usually the regulators in use are set to 2,600 psi or something like that. A good regulator will allow the gun to have nearly identical air pressure and air volume shot after shot until the internal pressure drops below what the regulator is set at. Regulators ain't cheap. A decent one can cost well over $200. But serious shooters use them. Most shooters who use regulators also use 4,500 psi tanks, which are usually carbon-fiber and very costly, but they provide a lot more shots. Really, REALLY serious shooters use what is called a "tethered" system. Instead of using a portable air reservoir bottle, they have a huge scuba tank and a regulator and run a long tube from the scuba tank to the gun. This allows thousands of shots at the same pressure before the scuba tank needs to be refilled. So... am I gonna grade my pellets? Am I gonna buy a regulator? Dunno. Let me see how the gun works first. But if I ever get really serious about this... mebbe so.

How to get yourself in trouble...

By CosmicConservative
So... my new pellet gun, which should get here next week, supposedly on July 5, is known to be a little loud. So I did a google search on "pellet gun silencer." According to many of the results I got back from that search, I am now likely on a BATF "watch list" for potential federal firearms laws violations. Seriously. What's even worse is I watched a fascinating Youtube video on how silencers work. And that video had a huge disclaimer about how even watching the video was likely to get you in trouble. Then on one of the pellet gun boards they posted a legal case where a guy got convicted of federal firearms violations for shipping a pellet gun with a home made silencer attached. He actually eventually won the case on appeal but not before serving time in jail. This is serious stuff! Apparently the BATF has a hair trigger in investigating and prosecuting any potential use, creation and especially sale of any noise suppression device that can be put on a firearm. And since the technology that suppresses sound on a pellet gun also works on firearms, well, that means pellet gun silencers are potentially illegal too. Now, from what I've gleaned by risking watching a few videos and reading up on the technology of silencers, I actually believe a pellet gun silencer would not need all the components of a firearm silencer (primarily due to the lack of hot and in some cases still burning gases in firearms), the basic ideas are similar enough that a pellet gun silencer adapted to a gun would probably reduce the noise a bit, and might reduce it enough to qualify as a "silencer." I am sort of amazed that this is such a potentially dangerous area of investigation. I suppose I understand it, but from what I can understand, just talking about it can get you in trouble. I am really sort of amazed... and a bit concerned. My natural curiosity is going to get me in a world of hurt one day. But I didn't think it would be over PELLET GUNS.

Movie Review: Brave

By CosmicConservative
Brave is the latest entry into the "Disney Princess" parade. The young princess in this case, Merida, is a red-haired tomboy who finds the royal life confining, especially when she is told she is to be married off to an allied clan's prince to retain the thinly held peace of the four clans of the kindgom. The animation, by Pixar, is, as usual, simply stunning. Pixar has mastered the art of creating stylistically unique worlds that still breathe believably on the silver screen. That is no small feat, especially as the stakes are raised with each successful effort. To get right to the point, this was an absolutely wonderful family movie. If this is an indication of where the Pixar/Disney merger is going, that's a good thing. You will laugh, you will cry, you will want to hug your spouse and kids. But it's also got some surprises. One in particular that the Cosmic Clan found very entertaining. The vocal work is also superb, especially considering the hyperbolic execution of typically opaque Scottish brogues. There were some times I wished for subtitles, but for the most part, the accents were distinct, memorable and comprehensible. The story itself parted ways with the Disney Princess pattern in ways that the Cosmic Daughter really liked. I don't want to give anything away, but I'll just say that Merida is 100% her own woman and there is no need for a rescue from a handsome prince. Definitely worth the price of admission. Cosmic says check it out.

Movie Review: Abraham Lincoln, Vampire Hunter

By CosmicConservative
Went to see this with the Cosmic Wife on a rare day off yesterday. So we saw it in the early afternoon in an almost empty theater. The Cosmic Wife liked it. She thought some of the CGI stuff was wildly overdone, but found the film to be fun and campy. I enjoyed parts of the movie and don't regret having seen it, but I did find the movie strangely lacking in precisely the things that it is getting celebrated for doing. For example, the movie is getting lots of praise for treating Lincoln as a serious figure, commenting about how the movie slows down and highlights key speeches such as the Gettysburg Address. But I had more or less the opposite reaction. I found the juxtaposition of the private action hero Lincoln and the public tortured philosopher to be completely unrealistic and unbelievable. I too found the CGI to be badly overdone. Normally I enjoy a good full-screen 3D extravaganza, but there are limits to plausibility that the movie routinely blasted through without even slowing down. I realize that's part of the appeal of the movie, and perhaps I should just accept it as campiness, but the gore was too frequently absurdly gratuitous and the action scenes were more appropriate for a Marvel comic book hero. Then there was the acting... Or there was supposed to be acting. Who the heck was that playing Mary Todd Lincoln? I am pretty sure they could have replaced her with a wind up doll. And the main vampire villain? Glower for me! More! The scene needs more glower! There were just enough nice touches to the script and plot to keep me from just rolling my eyes throughout the movie. And it was somewhat diverting to try to spot the historical references ("there's more than one railroad") involved. But in the end it was just a momentary diversion. The money and effort that went into this movie could have been better spent.