Lawmakers To Consider Spanking Ban - Irresistible Headlines News Story - KMGH Denver
BOSTON -- Lawmakers in Massachusetts will consider a proposed ban on spanking children in the state.
Boston television station WCVB reported that the issue is set for debate at a Statehouse hearing Wednesday morning.
The Boston Herald reported that State Rep. Jay Kaufman filed the spanking ban petition at the request of an Arlington, Mass., nurse who wants Massachusetts to become the first state in the country to stop corporal punishment.
It's just a matter of time before parents will have to petition the state authorities for any attempt to control their children. Grounding, after all, is just a mild form of water boarding, just ask any 13 year old girl.
Hat Tip to JSullins
A new type of motion capture has been developed that uses off-the-shelf components and could be mass produced for as little as a few hundred dollars. The "suit" captures virtually every move you make. Earlier techniques for motion capture have been very expensive and required banks of lights and cameras to capture the motion of key parts of the body. The new technique uses accelerometers, gyroscopes and ultrasonic echo-location to identify every movement the subject makes.
In the past motion detection has been done to create fluid movements of computer generated characters in video games or CGI effects ("Gollum" was created this way in Lord Of The Rings). In the future the suits will be used for game INPUT by the players. Think of a full-body Wii interface.
So, having spent a lot of time on the road, I saw a lot of bumper stickers. Now I know that my own experience can only be called anecdotal, but from my 4,000 miles across the country and back, I am happy to report that conservative bumper stickers are, well, conservative. For the most part they are tasteful, to the point and supportive of something, whether it is Bush, Republicans in general or just the troops in Iraq.
The liberal bumper stickers I saw were on the whole hateful, spiteful, childish and revealed a level of hypocrisy I found hilarious.
Examples:
One fancy SUV (Toyota, I think) sported a "Cheney / Voldemort in 2008" bumper sticker directly above a "Coexist" bumper sticker (you know, the one with the religious symbols worked into the word "coexist"). The message being very clear that it is right and proper for us to embrace any form of religious extremism, except for conservatism, which is the epitome of evil itself.
Every time I saw a bumper sticker about global warming or being green, it was INVARIABLY on an SUV being driven in blissful hypocrisy by a CO2 spewing liberal.
Perhaps my favorite example of liberal hypocrisy was on the brand new Mercedes SUV which sported on its shiny new bumper the question "Had enough? Vote Democrat". I guess driving a brand new Mercedes SUV is more or less comparable for this democrat with boiling ones own shoes for food. I felt like pulling up alongside and asking "had enough of what? Corporate profits? Conspicuous consumption? Irony?"
My favorite thing I saw on the trip though was the Budget rental truck towing what appeared to be a brand new black Porsche sports car.
Eco-warriors choosing sterilization to "reduce their carbon footprint."
I'm fine with this. The faster we get these genes out of the gene pool the better.
Had Toni Vernelli gone ahead with her pregnancy ten years ago, she would know at first hand what it is like to cradle her own baby, to have a pair of innocent eyes gazing up at her with unconditional love, to feel a little hand slipping into hers - and a voice calling her Mummy.
But the very thought makes her shudder with horror.
Because when Toni terminated her pregnancy, she did so in the firm belief she was helping to save the planet.
Personally, I think that human beings who react with "horror" to the thought of having and raising babies are a waste of carbon already.
Seriously, we are not far from having organized movements advocating human suicide to save the planet.
Wow, do you have any idea what it is like to drive from the middle of the Colorado Rockies to the middle of Kentucky in two days, stay there for a day and a half, then drive to the middle of Florida, stay there for two days, and then drive back to the middle of the Rocky Mountains, all in one single week?
Trust me, you don't wanna know....
Man my eyeballs are still buzzing from the road vibrations.
Wow, traffic on the site has dropped off the map too. Gee whiz, I hope I can get some interest back again...
Well, we were very relieved to see that my father-in-law has improved very much in the past few days. He is no longer in intensive care, but he's still in the hospital in something called "Respiratory Care" I think. He's still having to do dialysis and may have to do that three times a week for a long time. But he was alert and in good spirits this afternoon. So things look much better than we feared. Although he is still weak and not ready to go home.
Hope everyone has a good Thanksgiving. It's time for bed here.
Reports: 2,000 killed by cyclone - CNN.com
DHAKA, Bangladesh (CNN) -- More than 900 bodies have been recovered in Bangladesh following a devastating tropical cyclone, but local news reports put the death toll at more than double that figure.
As flood waters recede, aid workers say they expect to find scores more bodies when remote villages are finally reached and the counting is done. They face debris-blocked roads, no electricity and almost nonexistent communications.
In addition to the dead, another 15,000 were hurt and 1,000 people were missing, according to a relief official.
The government said Saturday that at least 915 bodies had been recovered, but news media, including a United News of Bangladesh report put the death toll at 2,000.
You would think this sort of thing would put New Orleans into perspective.
But it won't.
Wow, did you know that overhead projectors were complex optical devices? I had no idea...
I picked up an overhead projector for $20 (a new one costs from $150 - $350 or more). I could have gotten one for $10 but there were complications in the transaction (someone else had promised to buy it, but didn't show up, then called again.... ) and I ended up not buying it. Driving out to pick it up would likely have cost me another $10 or so anyway. The one I got is an old tank-like Bell and Howell model. For the purposes I'm going to put it to, it's probably a much better option than a new plastic-bodied model.
I also picked up a used 14.1 inch LCD monitor for $30 or so. Added to my lens I purchased last week (but which hasn't shown up yet) that's a total of $57.50 so far. I still need to figure out what wood I'm going to use to build it, I've got a lot of scrap wood, but I'm not sure I can get by without buying some lumber. But the largest remaining expense is almost certainly the acrylic top I am going to have to have on the top of the table. That may be as much as $20 all by itself, although I'm hoping I can find one cheaper.
My initial design isn't going to work. The dang overhead projector was about 2.5 inches taller than I expected, which will make the image just about that much too high to be comfortable to play. So I'm back to using a mirror to reflect the image up to the table and mounting the OP sideways. That will complicate the design of the optical path, but will simplify the design of the table top. Still it will end up being more complex overall... But not too much. I'll post the new design once I've modified it.
Back to the complexity of overhead projectors... See, I knew that OPs used a fresnel lens. Anyone who has ever worked with an OP remembers the concentric rings that are visible under the glass where the transparencies are placed. That's the fresnel lens. But I made a significant assumption that turned out to be wrong. I thought the fresnel was designed to collimate the light, sending a beam straight up through the glass instead of spreading throughout the room.
Well, it turns out that OP makers are smarter than that. They use a more powerful fresnel lens which actually concentrates the light back into a cone that meets the lower lens of the overhead part of the projector. It's really rather ingenious. And obvious, now that I realized it.
But it creates a problem for me. Since the light is in a cone focused on the overhead part, it ends up being twice as high as I need it to be for my purposes, and the result is that the light from the edges of the image simply miss my lens more or less entirely, creating an image that drops off rapidly after a bright central portion.
So that means that overhead projectors fresnel lenses are designed in a way that won't work with my lens position. And if I move my lens out to where it is designed to provide full illumination of the entire staging area, well, that means my optical path is going to be 45" long, which is way too long to try to work with, even with mirrors.
The obvious answer is to get an even more powerful fresnel lens that will lower the light cone to where I need it to be. But guess what? They don't make fresnel lenses with a 3.75" focal length to fit an overhead projector. And even if they did, they would cost more than I spent for the lens and OP together. Which would blow my budget.
So what's a gadget-obsessed tinkerer like me to do?
Well, one option is to try to change the nature of the light that the fresnel lens is refracting. My theory is that if I place a diffusing layer between the fresnel lens and the OP bulb, that will actually become the light source for all practical purposes, and the fresnel lens will no longer be refracting from the bulb back to the lens, but from the diffusing light source to the lens. That essentially will shorten the light cone by about half. Or so I hope.
So I put some wax paper under the fresnel lens and fired it up. Bingo, a slightly dimmer image, but the light cone was now roughly where I needed it and the full field of view was illuminated. But wax paper melts. So I need to find something that will provide the diffusing behavior I need, and is translucent enough to be bright enough to form an image, and is tough enough not to burn or melt in the blistering hot interior of an overhead projector... Oh, and it has to be about as thick as a couple of index cards on top of each other. At least to fit in the existing mounting it does. If I have to I can mount something thicker below the mounting, but that wouldn't be nearly as elegant as I want it to be.
So, once I get all that figured out, I need to design a lens/mirror combination that moves the lens and mirror together. Which is, of course, exactly what the OP's "overhead" part does, but it's lenses are not nearly strong enough for my needs. So I'm still working on it....
There may soon be an interruption in my blogging activities. My father-in-law is very ill and we are planning a trip to go visit him and the rest of the family. We may be leaving as early as tomorrow. I may or may not be able to post much during this period.