Cosmic Conservative

Rational Conservatism from the heart of America

Hobbies

Contemplations on gun design

By CosmicConservative
Having shot my new 9mm pistol a couple of times and therefore cleaning it a couple of times, I can't help but evaluate and pontificate on the state of gun design and manufacture. The crucial conclusion that I've reached is that modern guns are incredibly well designed. Almost absurdly well designed in fact. Watching a gun in action, knowing nothing about the internal functions, it would be reasonable to conclude that there must be a lot of complexity in the mechanisms invovled. After all a typical modern gun, rifle or pistol, has at least two separate safety mechanisms, has a means to feed bullets into the chamber automatically, can extract bullet casings and eject them out of the gun as fast as you can pull the trigger and is very hard to accidentally set off, even in the case of dropping the gun on a hard floor. But the reality is that most of that is accomplished with just a few actual parts, parts which are designed so well that they have been relatively unchanged since 1911 when the first clip loaded semi-automatic guns were introduced. Bolt action single-shot rifles are even simpler than clip-loaded guns. For comparison my air rifle is a vastly more complex device than my powder guns. Perhaps the most complex element of a modern gun is the trigger assembly. Triggers can be pretty complicated, especially multi-adjustable triggers designed for competition or combat. But the remaining components of a gun are deceptively simple looking. My Bersa, for example, manages to handle all of the shell loading, case ejecting and safety functions with maybe ten separate parts. Maybe ten. The carriage which slides back and forth and contains the actual barrel is almost entirely one piece, with a couple of pins and levers which implement the safety features. The actual function of loading the shells, ejecting the shells and firing the gun are almost entirely performed by the interaction of five or six separate parts. Each part has been shaped specifically to engage the other parts, but each part itself has very few moving parts other than a spring or a slide here or there. The barrel itself, for example, is a single piece of metal which actually "floats" inside the carriage, held in place by the carriage and a spring-loaded rod which also manages the recoil and return of the carriage after each shot. The case extractor is similarly simple and mostly performs its functions as a consequence of its shape and the action of the carriage as it reacts to the recoil of the fired bullet. New shells are loaded the same way, when the carriage is returned to its set position, a simple prong slides the next bullet from the clip into the chamber, and the clip itself is essentially just a spring-loaded casing which shoves the next bullet up to be loaded on the next shot. You can take the whole thing apart in just a few minutes. Taking it apart enough for cleaning takes just a few seconds. All you have to do is flip a lever which disengages the carriage and allows it to be slid off the front of the lower portion of the gun, and then pop out the retaining rod and spring holding the barrel in, and you're ready to clean. I have always considered ten speed bicycles to be a marvel of engineering simplicity and robustness. I think I'll have to put guns in the same category. The level of cleverness involved in gun design is really impressive.

Shooting range scavengers

By CosmicConservative
So I went to the shooting range yesterday. The range I shoot at is really just an open area with mountains on each side that serve as a backdrop for the bullets and wooden rails set up to mark out where you stand and shoot. You have to march out into the deadly range area to set up your targets. I only go when it's not crowded so I don't know how people manage their targets when the place is busy. I imagine you have to ask people to hold off shooting while you hike out and set up targets. There are no tables, no benches, nothing but a few rails sort of like horse hitching rails which are so rickety that you can't even lean against them, much less use them as a bench rest. Most serious shooters bring their own portable bench rests to do their shooting. It is also completely unsupervised. There is nobody there but the shooters. Well, anyway, so I went there yesterday and as I was driving up, the only person present was packing up and leaving. Great! I don't like shooting with a bunch of strangers. The last time I went there this Twenty-something guy and his tattooed pierced goth girlfriend brought an AK-47 type gun and set about blasting like they were training for the zombie apocalypse. I would never shoot a gun the way they were shooting, and they weren't shooting very well. They set up a pumpkin about 30 feet and it took them several tries to even hit it. With a rifle. They must have shot a thousand rounds, and those rounds ain't cheap! So there's a tie-in here. Yesterday as I was setting up to shoot, two cars drove up. "Crap!" I thought, because I'm just a generally anti-social curmudgeonly person. But no big deal, I just hoped it wasn't Rambo Jr and his sqealing GF again. It wasn't. Instead an older guy, a middle aged woman and three young kids got out. By "young" I mean age 4 - 8 maybe. Squalling children. Bratty even. No ear protection on any of them. No guns either. What the hey? Turns out they were there to scavenge the place. Each of the kids was handed a bag and the five of them scattered out across the range (it's probably a quarter mile long) and began picking stuff up out of the dirt. While I was shooting. Two other shooters showed up while the kids were there, one of them another AK-47 dude. Apparently if you own an AK-47 you are required to blast as fast as you possibly can, because that's what this guy did too. But after a couple of clips his gun jammed. Imagine that. Anyway, while this is going on, those kids are just milling around, one of them is bawling at the top of his lungs about how he hates this place, his auntie Lou doesn't make him do stuff like this and how he wants to leave. They were still there when I left. As I was getting in my car I saw them converge on my spot, looking for anything I may have left behind. I almost wished I had brought some candy bars I could have left for the kids. Shooting range scavengers. And from their conversation with the "regulars" apparently they do this as a regular chore. I wonder how much money you can make scavenging a shooting range. They apparently found several live rounds too. But mostly I think they were picking up large caliber casings which I suspect you can sell to reloaders for a pretty penny.

The Bersa Thunder UC Pro 9mm post...

By CosmicConservative
I am a bit surprised that nobody commented on my acquisition of a handgun. Especially since I purchased it primarily for the purpose of concealed carry and personal protection. I took it out to the shooting range yesterday. Which was probably a poor idea since I am suffering from a serious head cold right now. But I did anyway since I was pretty anxious to see how it shot. The results are somewhat mixed. It seems to shoot pretty nice groups at 30 feet, which is nice for a gun with a 3.5" barrel. But the sights are fixed and they are not aligned properly so now I either have to have a gunsmith align the sights or else replace the fixed sights with after-market sights that are adjustable. Of course there are other options too, such as red-dot finder sights, laser dot "sights" etc. I'm inclined not to use those since the gun is intended to be a concealed carry gun and therefore I want to keep it as small and inconspicuous as possible. Most of my groups at 30 feet were within a two inch center to center circle, but they were not nearly as close to the bullseye as I wanted. Even trying to adjust to compensate for the amount the sights are off, I just couldn't get a group centered on the bullseye. Still, based on the groupings I feel like the gun itself is accurate, but I don't like the sights being off. The sights are "Sig Sauer" style sights and are replaceable with other Sig Sauer style aftermarket sights, many of which are adjustable. Any thoughts from anyone on what to do about misaligned fixed sights on a pistol?

Oh yeah... crossbow

By CosmicConservative
While I was at the gun show waiting for my background check to be complete for the pistol trade, I purchased an inexpensive crossbow. Just for fun. It's pretty cool. It shoots little plastic bolts. It's not very powerful, but it will stick a bolt in a tree about half the time. The other half the bolt bounces back. But it would leave a mark. The guy who sold it to me claims it is great for killing squirrels and rabbits. Twenty bucks. Heh, the same one is on Amazon for $11. Sigh. Still, it's fun.

The New MakerBot Replicator

By CosmicConservative
Macintosh moment indeed.

The New MakerBot Replicator Might Just Change Your World | Wired Design | Wired.com.

The BotCave is home to MakerBot, a company that for nearly four years has been bringing affordable 3-D printers to the masses. But nothing MakerBot has ever built looks like the new printer these workers are currently constructing. The Replicator 2 isn’t a kit; it doesn’t require a weekend of wrestling with software that makes Linux look easy. Instead, it’s driven by a simple desktop application, and it will allow you to turn CAD files into physical things as easily as printing a photo. The entry-level Replicator 2, priced at $2,199, is for generating objects up to 11 by 6 inches in an ecofriendly material; the higher-end Replicator 2X, which costs $2,799, can produce only smaller items, up to 9 by 6 inches, but it has dual heads that let it print more sophisticated objects. With these two machines, MakerBot is putting down a multimillion-dollar wager that 3-D printing has hit its mainstream moment.
I am SOOO buying one of these. Now I just gotta figure out how to swing it...

Throwing knives...

By CosmicConservative
Yeah... now I've bought some small throwing blades and am practicing with them. They are essentially steel blades about as long and heavy as a small butterknife, but with a sharper point and balanced for throwing. They look like this: We were at a flea market and I just happened to see them at a stall, a set of 3 for $15. On a lark, just to test out the theory that these flea markets are all about bargaining, I offered the guy $10. He laughed, but then pointed to a set of two of the identical knives and said "For $15 I give you both, 5 knives." Hmm... OK. So now I'm chunking knives at trees. They penetrate surprisingly deep into a pine tree, and even deeper into an aspen tree. Just a simple toss, with no real force behind it, will go about 3/4 of an inch deep. If I put any effort into the throw and it happens to stick straight, I have to work to get it back out of the tree. So far I am just messing around, but within 15 feet or so I'm probably sticking about 1/3 of my throws. It's tricky but you can sort of figure out how the blade is going to flip and with practice from a set distance I think I could stick one pretty consistently. Within 25 feet or so anyway. And that's a pretty long range. Longer than that and they actually catch the air and start going all wobbly and you can't predict how it will flip. Of course you can get heavier knives for longer throws. These are baby throwing knives. But you gotta start somewhere.

Slinging it!

By CosmicConservative
So, I take the dogs outside probably four or five times a day. I also try to do a daily walk around the neighborhood if I'm home. And I just meander outside from time to time just to enjoy the fresh mountain air. 90% of the time when I do that, I bring my wrist-rocket slingshot with me. I've been doing that for about two years now. I had gotten pretty good with the "traditional" style of holding a slingshot. That style is to hold the slingshot vertically and sight down the center of the "Y". And I had gotten fairly decent shooting the slingshot that way, meaning I could usually hit a fist-sized target fairly regularly from ten to fifteen yards. But there are a few caveats. First, I could occasionally hit something while walking along, but not very consistently. Usually I would have to stop and take the time to aim and fire. Second, it is fairly awkward to hold a slingshot this way, awkward for both the hand holding the slingshot and the hand pulling back the sling. In fact after about two dozen shots, it actually starts to make my wrist and fingers ache. So a few months ago I started experimenting with an unorthodox hold, where I'm holding the slingshot sideways and holding the sling pocket itself "upside down" with respect to the normal hold with the "Y" upright. This greatly reduces the stress on both wrists and, perhaps not surprisingly, produces much more consistent accuracy, even while walking. For example, I can hit a 1x6 board at 15 yards very consistently. I can get most shots in the range of 15 - 20 yards within a six inch radius of a bullseye. And I can hit a bucket at 30 yards about 50% of the time. My best shot sequence so far was to hit a bottle cap at 15 yards, then hit the 1x6 board at 20 yards and then the pail at 30 yards in three successive shots. However, I have yet to really try to do anything serious, like hit a squirrel or anything. I think I could, but not consistently. I shot a pine cone out of a tree at about 25 yards, but it took me about five shots before I finally nailed it. Squirrels don't hang around while you zero in on them. Still, it's pretty nice to be able to hit pretty challenging targets while walking.

Condor (airgun) update

By CosmicConservative
So, it's been raining and storming just about every afternoon for the past few weeks so I haven't been doing much with my Condor air rifle. Today I finally got a chance to take it outside and shoot it. Up until now I had been zeroing it in at 25 yards. Today I moved that back to 35 yards. My groups actually improved. I was putting pellet after pellet basically into the same hole, leaving smaller than dime sized groups. There is one issue with the gun though. The way the gun is designed, using the air reservoir bottle as the butt of the gun, makes it just a bit more difficult to get your head situated for a good scope picture. The result is that you can rather easily get your eye out of line with the scope, and even a mild misalignment of your eye and the scope will mean half an inch to an inch of drift at 35 yards. I am getting better at it though, but I may look into a modification that moves the bottle down an inch or so. The other option is to get different sight rings which raise the scope higher, but the higher the scope, the more parallax you have to adjust for at different distances... Anyway, it's really, really sort of silly to complain since it shoots so crazy accurate already, but it would be nice to have a more comfortable shooting position. Yeah.... I know, there are other guns out there that use a traditional wooden stock and so would not have this particular issue, but they don't have the Condor's benefits. Really liking this gun. It's awful sweet to pull the trigger and see four pellets in a row fit well inside a bottlecap...

Largest barrel in the world

By CosmicConservative
So, I happened to run across this and since I had done a couple posts here on barrels, I just figured I'd post this here for fun. This is the "Heidelberg tun" and is the fourth such enormous barrel to be created and placed in Heidelberg castle, dating back to the 16th century. Reportedly making this barrel (I guess a monstrous barrel is called a "tun") required a couple dozen entire oak trees. This one stores wine. There have been a couple of similar, although much smaller "tuns" that have stored beer.

Pellet gun design update

By CosmicConservative
I had posted a month or so ago that I had an idea for a superior pellet gun design. Well, I've refined that design and I now believe that if the design could be turned into an actual working pellet gun, it would be the most accurate, most flexible and most powerful pellet gun on the market. Basically my design focuses on removing as many variables from the pellet firing process as possible. In fact I believe it has essentially removed every possible variable, allowing a series of shots of virtually identical power, meaning virtually identical muzzle velocity. Every pellet gun on the market today has serious issues with variable factors in the pellet firing process. The current design which virtually every gun follows uses a heavy hammer which smashes down on a spring-loaded valve, which quite literally bangs open the valve for a split second allowing gas to escape while the valve is open before the spring and air pressure inside the tank close the valve again. Even pump action pellet guns use a similar hammer striking a valve approach. There are multiple problems with this approach. 1. The hammer itself suffers from a variety of mechanical effects which cause its striking force to be variable. Those include friction, position of the gun, spring exhaustion and alignment. Thus while the hammer generally hits with a fairly predictable force, the actual force has been measured to vary by as much as 10% even in high quality guns. 2. The valve has two forces which oppose the hammer, the spring and the air pressure inside the tank. This creates a quite complex curve when you look at how long the valve is open, how much air is expelled from the tank, and how quickly and smoothly the air is expelled. The result is typically a "bell curve" distribution of actual pellet-expelling force. This is because as you reach the maximum capacity of the tank, the air pressure inside the tank can actually overcome the ability of the hammer to open the valve. This is called "valve locking", and it's a real problem with PCP guns, especially as the hammer suffers spring fatigue or friction issues which reduce it's force. A valve-locked gun simply doesn't fire. However, it's not a binary situation. The valve itself if usually a modified "poppet valve" which has a "T" shaped hole in the valve so that when the valve is pushed below a seal, the upper branch of the "T" is exposed to the air in the container which rushes out, powering the pellet. When "valve lock" occurs the hammer simply doesn't push the "T" down far enough to allow any air to escape. But if the valve is pushed down far enough for a portion of the valve hole to be exposed, then SOME air escapes, but it is a constrained flow, which increases turbulence and decreases air efficiency. The end result is that even with higher pressure in the tank, there is less force on the actual pellet. As the air is expelled, the top of the "T" is forced further and further down into the tank, allowing more efficient air exhaust which increases the power until you hit maximum efficiency for the tank, at which point the pellet's muzzle velocity will be at its highest. 3. From that point on each shot reduces air pressure, reducing efficiency and pellet velocity declines. The reason current PCP designs work reliably at all is because you can exploit this bell curve and get up to a couple dozen shots within a reasonable variation of muzzle velocity such that the point of impact does not move much up to reasonable shooting distances. But it does move. 4. As the air pressure in the tank declines, the hammer knocks the valve down further into the tank, leaving the top of the "T" exposed to allow more air to flow for a longer period of time simply because it travels farther. This is true until the valve reaches the limit that the spring will allow, by which time the gun is usually no longer shooting accurately anyway. Fortunately this effect actually increases the right side of the bell curve described above. There is less air pressure in the tank, but the valve is open longer, providing a larger volume of air which provides more thrust to the pellet, resulting in more shots in the usable zone of the bell curve. Anyway, my design pretty much does away with all of that. The design essentially provides exactly the same air pressure and air volume for every shot until the air reservoir no longer has enough air to power the gun. There is no "bell curve" of performance, it's a theoretical straight line from the first to the last shot. If I could build this gun and it would perform as I expect it to, I could easily sell them for $6,000 each.